Categories

False alarms and system malfunctions can be aggravating, and more importantly, may prevent your home’s security from working how it should. Thankfully, most problems, from dead batteries to false alarms, are straightforward to remedy. Explore our tips for troubleshooting your home alarm system in Mobile. We’ll help keep your family safe and your system operating as it should.

Test Your Home Security System In Mobile

One of the best ways to troubleshoot your home’s security is to test it yourself! Modern systems allow you to put them in test mode to avoid triggering an emergency call. After switching to test mode, follow these steps:

• Turn on your system as you would when you head out.
• Open a window or door that uses a contact sensor, or try to trip another device. Close the door or window so it doesn’t trip the alarm as you get out of test mode.
• Let the alarm resonate for 60 seconds to make sure a message is dispatched to the security provider and an entry is created in the alarm activity log.
• Continue testing equipment as you wish
• Check the systems’s activity log to verify functionality.

No need to worry, monitoring specialists can tell that your system is involved in a test. Just be sure to turn test mode off when complete. It’s wise to test monthly or whenever you adjust your home’s internet or phone service.

Check The Placement And State Of Motion Sensors

Although an integral aspect of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with a few simple troubleshooting steps.

• Do a visual check. Are there things that could move within the path of the sensor, like a window treatment caught in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can lead to poor performance. Make sure the device is clean.
• Does the motion detector come with pet immunity you can enable? Some sensors can be configured to ignore pets up to 100 pounds.
• When was the battery replaced? Low batteries can impact performance or result in false alarms.
• Is a heat source affecting the sensor? Too much heat from direct sun or a fireplace can cause an alarm.

Keep Batteries Ready And Watch Out For Low Battery Notifications

One of the great aspects of new home security systems is that they’ll alert you when batteries are running low. If your system is equipped with a control panel or app, you’ll usually discover alerts there. Depending on your alarm, you might hear an occasional beep when batteries are running out. 

Motion sensors, contact sensors, smoke detectors, and other wireless devices have batteries that need to be replaced every year or two. It’s best to keep batteries on hand and establish a replacement schedule. Top systems also have a rechargeable backup battery for the central control panel. This backup battery helps keep your system running if you lose power and should recharge itself once the electricity is working again. If it doesn’t, you will need to replace it.

Troubleshooting Is Simple With ADT Home Security In Mobile 

As the leading name in home security, ADT builds systems that supply unrivaled protection and functionality. Getting into test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always be sent updates when a battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfectly suited to your Mobile home. Call (251) 207-7344 or submit our form today!