ADT® Authorized Dealer Serving Mobile & The Gulfshores Area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Mobile Home

Property owners must safeguard against a variety of risks like burglary, flooding, and fire. But what about something that can’t be detected by human senses? Carbon monoxide is different from other risks because you may never know it’s there. Even so, installing CO detectors can simply protect yourself and your household. Explore more about this dangerous gas and where to place carbon monoxide detectors in your Mobile home.

What Is Carbon Monoxide?

Called the silent killer because of its absence of odor, taste, or color, carbon monoxide is a common gas produced by the incomplete combustion of fuels. Any appliance that uses fuels like an oven or fireplace can produce carbon monoxide. While you normally won’t have any trouble, complications can crop up when equipment is not regularly serviced or adequately vented. These mistakes may result in a proliferation of the potentially lethal gas in your residence. Generators and heaters of various types are the most frequent causes for CO poisoning.

When in contact with lower amounts of CO, you might suffer from dizziness, headaches, fatigue nausea, or vomiting. Continuous exposure to higher levels could cause cardiorespiratory failure, coma, and death.

Tips For Where To Place Mobile Carbon Monoxide Detectors

If your home is without a carbon monoxide detector, get one today. Ideally, you ought to use one on every floor, including basements. Browse these recommendations on where to place carbon monoxide detectors in Mobile:

  • Place them on each floor, especially where you utilize fuel-burning appliances, such as furnaces, water heaters, fireplaces, and gas dryers.
  • You should always install one within 10 feet of sleeping areas. If you only have one CO detector, this is where it should go.
  • install them about 10 to 20 feet from potential CO sources.
  • Do not install them right next to or above fuel-burning appliances, as a small amount of carbon monoxide could be emitted when they kick on and prompt a false alarm.
  • Secure them to walls about five feet above the ground so they can sample air where people are breathing it.
  • Avoid installing them in dead-air zones and near doors or windows.
  • Put one in areas above attached garages.

Test your CO detectors routinely and maintain them in accordance with manufacturer instructions. You will generally need to replace them in six years or less. You should also ensure any fuel-utilizing appliances are in in proper working condition and have adequate ventilation.